Wingspan 1480mm Airfoil HN1038 Overall Length 950mm Weight 500g   $0   Currently Not Available.

The Nemesis continues to be a favorite amongst slopers worldwide. With an excellent quality and finish that comes with all Breta models, the Nemesis is a great all round molded 60" glider.

The Nemesis has proven itself it many aspects of slope flying. The HN-1038 airfoil, tapered wing with elliptical tips provide a fast roll rate for front side aerobatics yet it still maintains great lift and docile handling at lower speeds. If the wind drops off, the Nemesis will fly in next to no wind while other pilots can only sit and watch. The standard glass versions have flown 184mph (294kph) dynamic soaring and the carbon versions will do a lot more. It is also one of only a handful of 60" gliders to record a sub 40.00 in F3F competition.

The glass fuselage is reinforced with carbon in all the right spots to give a nice stiff finish. It is complete with pre-latched carbon canopy, push rods already installed with the ball link ends connected and a ballast tube that is factory installed and accessed from under the wing. The removable, hollow molded v-tail features live hinged and wipered elevator/rudder surfaces. It is bolted onto the fuse with the two provided bolts that are countersunk to give a clean, drag free finish. No gluing the tail on or guessing whether the incidence is correct, the work is already done for you and the removable tail is great for traveling. The wing is hollow molded from CNC moulds with a carbon capped spar. Ailerons are also live hinged with wipers and come with brass horns. For a clean finish, the servo areas are recessed into the wing for the supplied glass servo covers to fit.

We recommend the new synthesized JR receivers, the RS70S PCM or the RS77S SPCM receivers. The open fuse area is small but we easily fit two JR 375 micro servos and a Sanyo 1000Mah AAA Nimh battery pack around the receiver. For the wing we have been using the Hitec thin wing servos, the HS-125MG or the digital HS-5125MG.

The stock Nemesis is a glass aileron model though carbon versions and flaps can be purchased by special order.

Falcon Gliders are happy to supply recommended servos, JR receivers, transmitters and quality Sanyo battery packs to complete your models. Enquiries welcome.