Wingspan 1475mm Airfoil MH30 Overall Length 860mm Dry Weight Glass 550g Glass Version $370

Have the greed for speed and are into electric gliders? Look no further because Falcon Gliders is pleased to announce the Jaeger hotliner.

The Jaeger is a 1.5m span, T-tail, fully molded hotliner offering a truly versatile electric glider for a great price. 

It is available as standard with ailerons, flaps and elevator and is capable of most aerobatics and the blistering speed runs that hotliners are renowned for. But don't think this hotliner is only capable of blasting around the sky,  it is quite capable of thermalling very well too, and the addition of flaps allowing for full span camber adjustment, will have you it specking out in no time.  Wings and horizontal stabilizer are bolt on so the Jaeger can be broken down into a small package for traveling with too.

Construction is a glass/balsa/glass lay-up with carbon fiber used in the right places. All surfaces have wipers and the addition of screw in control horns means setup is quick and easy. Servo covers and motor mount are supplied as is all hardware and even a hex key for the wing bolts. The Jaeger is also complete with wing, fuse and tail bags.

Five thin servos will be required for the ailerons, flaps and elevator. The elevator servo mounts in the fin through an access hatch allowing for easy and fast setup. The nose diameter is 36mm as supplied (but can be cut back to take a bigger spinner if desired)  and a wide range of power systems can be installed, however a heavier motor is recommended in order to balance without additional weight. The slender fuselage will work easily with most 3 to 4S Lipo packs, up to around 2500mAh capacity.

How to build the Jaeger

Download Build Manual (Pdf File 890kb)