3M 5200 White Marine Adhesive Sealant

One of the top DS products for Mouldies. Perfect for re-attaching control surfaces and tested to well over 300mph.

Brass Ballast Slugs

Set of 10 x 19mm brass ballast slugs. Perfect fit for all RCRCM models.

Glass Ballast tubes also available on request.

Sullivan 2-56 Gold Clevises

Bulk Sullivan 2-56 gold clevises complete with pin clip and 2-56 nut.

Sullivan 4-40 Gold Clevises

Bulk Sullivan 4-40 gold clevises complete with pin clip and 4-40 nut.

Sullivan 2-56 Full Threaded Rod

30cm lengths of sullivan 2-56 full threaded rod.

Sullivan 4-40 Full Threaded Stainless Rod

30cm lengths of sullivan 4-40 stainless full threaded rod.

Control Horn Set

Perfect for all control surfaces. This set consists of 2 x M3 brass horns complete with 2 x aluminum mounting nuts and 2 x brass pinned clevises.

Brass horns available in short (16mm) or long (23mm).

Carbon Rod Couplers

Ideal fittings for carbon push rods. This set consists of 2 x aluminum fittings that glue to the end of your push rod with a 2mm threaded end for the 2 x supplied clevises.

Fittings available for 4mm or 6mm carbon rods.

Clevises

The clevis we have been using on all our mouldie builds. This set of 10 clevises are made from hardened plastic that eliminates any slop when threaded to a 2mm / 2-56 threaded rod. The brass pin locks in place and has a much higher strength than standard nylon clevises.

Available in standard (23mm) or micro (17mm). Spare brass pins are available.

Control Horn with Ball and Clevis

These horns with brass ball bearing allows for a free and exact movement of the control push rod at all levels. Included are usual clevises with a longer brass pin that fits the brass ball. Set includes 2 x horns and 2 x clevises.

Spare brass pins are available.

MPJ 2400 Small Ball Link M2/M1.6

These small ball links come with an M1.6 pan head bolt that slides through the brass ball and is secured by an M1.6 nut. The plastic clevis will fit either M2 or 2-56 threaded rods.

MPJ 2420 Medium Ball Link M2/M2

These medium ball links come with an M2 pan head bolt that slides through the brass ball and is secured by an M2 nut. The plastic clevis will fit either M2 or 2-56 threaded rods.

MPJ 2406 Small Ball Link M2/M2 Short Shaft

These small ball links feature a single piece ball/shaft/thread and are secured by an M2 nut. The shaft is short (5mm from base to top of ball). The plastic clevis will fit either M2 or 2-56 threaded rods.

MPJ 2406 Small Ball Link M2/M2 Long Shaft

These small ball links feature a single piece ball/shaft/thread and are secured by an M2 nut. The shaft is long (7mm from base to top of ball). The plastic clevis will fit either M2 or 2-56 threaded rods.

MPJ 2402 Small Ball Link M2/M1.6 Short

These small ball links come with an M1.6 pan head bolt that slides through the brass ball/shaft and is secured by an M1.6 nut. The plastic clevis will fit either M2 or 2-56 threaded rods.

Threaded Couplers

Designed for fixing a clevis or ball link to a metal or thin carbon push rod. These feature an M2 thread and hole sizes are available to suit either 1mm piano wire, 2-56 rod (1.8mm) or 2mm rod.